2.4 KiB
2.4 KiB
| title | description | sidebar_position |
|---|---|---|
| Bill of materials (BOM) | Add description | 1 |
Here's the list of the materials needed to construct a Piqpoc sink.
For the base structure:
- Ikea Nissafors: A similar tray would do. But we chose this one for the ease of adjusting its height, its size fitting nicely with the plastic washbasin tray.
- 2 x containers to store water: One for clean and one for dirty water: We used these from IKEA for convenience of getting all materials from the same store. Any bucket that fits would do the job. We'd suggest to use at least 5 liters for less frequent refilling.
- 3/3.5/4 mm x 10/15mm screws with nuts: You'd need just 3 set of screws and nuts.
- Plastic tray from Ikea: Feel free to use the colour combination you like.
For running water:
- DC pump (5V)
- 1m of hose in adequate size for the pump you purchase, can be found in local hardware or aquiarium stores
For the Switch Box
- Illuminated Pushbutton: We used a button like this one, but purchased it from the local electronics shop instead. Would suggest you to do the same.
- USB-C adapter: One of these did the job for us. If you have any existing USB adapter, you can use it.
- Small size Tupperbox to use as a switchbox. (alternatively you can 3d print the switch box using the files we provide)
:::info[materials] Alternatively you can 3d print your swtichbox using the files we provide. ADD FILE HERE! :::
For the Faucet
- A water toy that can be converted to a faucet: You can be creative to use any toy that can resemble or function as a faucet. The only criteria is that it needs to guide the hose from the pump into the washbasin. We used one of these toys that we had at home.
:::info[materials] Alternatively you can 3d print your faucet using the files we provide. ADD FILE HERE! :::
Tools
- Drill and drill bits for metal and plastic (5.5mm, 3.5mm)
- Solder iron
- Hot glue gun with the accompanying size of glue